Course Length: 5 days
M-1/R-1 Advanced Composite Structures: Fabrication and Damage Repair - Phase 1 course, or
Equivalent (5 year min) experience with advanced composite materials and processes.
(*Please contact Abaris for equivalency test criteria and evaluation.)
This course is designed for the tooling engineer, tool designer, tool fabricator, or anyone else that has a desire to learn about designing and building molds and fixtures using advanced composite materials.
In this course the students will learn about tool design techniques that contribute to both dimensional stability and tool longevity. After discussing basic concepts in the classroom, the students are encouraged to apply these lessons in the workshop to see for themselves how simple ideas can greatly improve tool quality.
Molds and fixtures are fabricated in class off of existing master models, patterns, or parts using the latest materials and techniques; much emphasis is placed on using TenCate AmberTool® low temp curing carbon prepreg materials for fabricating molds that can later be post-cured for use at elevated temperatures.
Room temperature curing wet resins and dry fabrics are used for making intermediate transfer patterns and trim and drill type fixtures.
AmberTool® is a registered trademark of Royal TenCate.
Key Lecture Topics:
- The tooling family; from master model to molded part.
- Tool codes/designations.
- Prototype vs. production tooling.
- Making tooling from existing parts.
- Complex vs. simple geometries.
- Indexing and part to tool coordination.
- Realistic part and tool design tolerances.
- Thermal properties; Coefficient of Thermal Expansion (CTE).
- Springback allowance.
- Integrated stiffening techniques.
- Backup structure materials and design.
- Damage prevention through design.
- Vacuum and pressure integrity issues.
- Lightweight tool-design concepts.
- Mold fabrication considerations: ply orientation and layup techniques.
- Tool repair materials and procedures.
- Permanent vacuum bags and semi-rigid caul tooling.
- Application of semi permanent seal and release systems.
- Preparation of a master-model, permanent pattern, or an existing part for use in tool-laminate fabrication.
- Mock up fences and decks for molding flanges.
- Add indexes and other pertinent design features.
- Fabricating either a carbon fiber or fiberglass mold using the latest low-temperature curing tooling prepreg from TenCate.
- includes bagging and cure processes and procedures.
- Fabricating glass-epoxy fixture laminates using wet-layup materials, methods and techniques.